Starter XL kit for gel nails 30g with LED light

In the package you get

• 48W DUAL LEDs lamp in the wavelength of 365nm and 405nm.. Lamp is suitable for drying the nails on the hands and feet
•  primer - bonder  15 ml. (for optimum adhesion, apply it before the first phase of gelation)
• clear gel 30 g - high quality gel
• Top-NO WIPE, 5g   
  
• adhesive for artificial tips with brush for easy application 7, ml,
  
• quality pliers for shortening artificial nails,
• 6 mm gel brush
• 1 professional chip granulation 100/180,
• 1 professional chip granulation 240/240,
• buffer block,
• 5 x wooden manicure stick,
• 50 pieces of cellulose pads,
• 20 templates 
• 120 tips of artificial nails of french with a medium extension pocket in the box (10 different sizes)
• 100 ml. high quality nail cleaner (cleaning liquid).

APPLYING PROCEDURE:

1. Shape and prepare the nails and skin around the nails (manicure) with nail files.
2. Gently push the skin around the nail with the right pusher or with a wooden manicure stick.
3. Gently matt the whole nails with buffer block.
4. Clean the whole nail with cleaner and make sure that the nail is completely clean and dry.
5. Before applying construction gel, we recommend you use primer bonder (dries on air) which you apply on the natural nail because it increases the effect of gel.
6. Then you apply gels in this order: contruction gel (2-3 coats), french white for the french tip (2 coats) and  finally the finish gel (one coat). Always apply the gel in thin coats and only on the nails, if you accidentally apply it on the skin around your nail, wipe it with a wooden manicure stick before drying with UV light.
7. Dry each coat under UV light for 120 seconds (36W-UV light).
8. Wipe the finish coat (finish gel) with a cleaner after drying it under UV light.
9. If you are extending your nails with an artificial tip 
10. choose the right width of the tip that fits your nail
11. apply the glue on the pocket of the tip and glue it on the nail
12. wait for the glue to dry, matt the nail and shape it however you want to (you can also shorten it with claws for artificial tips)
13. file the crossing between the tip and the natural nail. Clean the whole nail with cleaner and make sure that the nail is completely clean and dry.
14. Proceed from point 5 to point 8.